48-Volt Air Conditioner Cable for EcoFlow Power Kits (4-Post to Bar...
The 48-Volt Air Conditioner Cable for EcoFlow Power Kits (4-Post to Bare Wire, 20 Foot) gives you great flexibility when used with an EcoFlow Power Kit: it enables you to have the high BTU output and low power draw of a 48-volt air conditioner, and the full output power (1000W@12V or 1600W@24V) from the DC circuits on your Smart AC/DC Distribution Panel.
This cable connects into any of the three battery ports on the EcoFlow Power Hub, allowing you to use the full 100A@48V input/output of the battery port to power a 48V RV air conditioner, such as a RecPro 48V heat pump air conditioner (9500 BTU or 13500 BTU) or a Coleman-Mach Mach 10 48V air conditioner.
Embrace the convenience, reliability, and comfort it brings to your on-the-go lifestyle. Get yours now and unlock the true potential of your EcoFlow Power Kit.
Note: If you are pairing an RV rooftop air conditioner with your EcoFlow Power Kit, we recommend a 10 kWh EcoFlow Power Kit or a 15 kWh EcoFlow Power Kit, so you have enough battery bank capacity to run the air conditioner and your other loads for a decent amount of time.
Key Features: 48-Volt Air Conditioner Cable for EcoFlow Power Kits (4-Post to Bare Wire, 20 Foot)
- Length 20 ft
- Connects your EcoFlow Power Kit to any 48-volt DC air conditioner
- Unparalleled Versatility
- Rapid Charging Technology
- Durable and Tangle-Free
- Easy to Use
- 1-year warranty.
FAQ
FAQ
How does the Power Hub communicate the voltage to the Smart Distribution panel?
There are two included RJ45 network cables included in a Independence Power Kit. One that connects the Power Hub directly to the Smart AC/DC Distribution Panel; a second one to connect the Power Hub to the Power Kit Console.
What is the operating temperature range of the Power Kit Console?
The information as stated in the user manual is below: -20C to 50C (-4F to 122F). This is the operating temperature range for all
Power Kit components.
What is considered a standard alternator input scenario and what is else is allowed involving alternator charging with EcoFlow Power Kits?
All 3x PV/ALT input ports can be used as alternator charging ports. The first ATL-IN input port can allow 70A max and 1600W input max, meaning that if you draw from 12V alternator you can only get 13.6V x 70A = 952W which is almost 1000 (it will fluctuate between 950W and 1000W). If a 48V alternator is connected to port 1, then an estimated 54V x 29.6A = 1600W is expected. The 2nd and 3rd ALT-IN input ports are both 30A max and 1600W max. If you connect a 12V alternator to these ports, an estimated 13.6V x 30A = 408W each is expected. If you connect a 48V alternator to ALT-IN 2 or 3 ports, an estimated 54V x 29.6A = 1600W each is expected. If you connect a 12V alternator on all 3 ALT-IN input ports, an estimated 952W + 408W + 408W = 1768W (if your 12V alternator can deliver 70A + 30A + 30A = 130A) is expected. If you use 48V alterantor on all 3 ports, an estimated 1600W + 1600W + 1600W = 4800W input is expected.
What type of shore power inlet is recommended for an EcoFlow Power Kit?
The Power Kit allows up to 30A input, so we recommend 30amps max. 30A to 15A converters are available if your enegy consumption needs are not high. Furrion is a tested and trusted brand that has worked perfectly with an EcoFlow Power Kit.
Manuals
Manuals
48-Volt Air Conditioner Cable for EcoFlow Power Kits (4-Post to Bare Wire, 20 Foot)
FREE SHIPPING
- Reviews
- Questions
