CRL Universal Van Sliding Window Passenger Side (VW1033R)
Couldn't load pickup availability
IN STOCK!
Need smaller rear sliding windows for camper vans with rear beds? We have CRL Universal Van Sliding Window Passenger Side (VW1033R) that will complement the styling of your camper van, whether it's a Mercedes Sprinter, Ford Transit, Ram Promaster, or Nissan NV.
This single-pane glass VW1033R half-slider window has an opening panel that slides horizontally. The opening section of the window also has a detachable screen. This window is a clamp-in style, meaning it has pre-applied weatherstripping, so you don't need any adhesive to install it. Also, it's designed to clamp right onto the sheet metal of your van, no brackets or adapters are necessary.
Want a similar size and shape window that you can use in rainy conditions? Check out the Arctic Tern awning-style bunk window which comes with a built-in blind and screen assembly.
Want to save shipping costs? Use the discount code PORTLANDPICKUP when you order and pick up from our Portland, Oregon warehouse and you won't pay any shipping costs.
Key Features: CRL Universal Van Sliding Window Passenger Side (VW1033R)
This CRL Universal Van Sliding Window Passenger Side (VW1033R):
- Fits the passenger's side of any van model
- Has cutout dimensions of 10" high x 33" wide
- Has 28% dark gray factory tint
- Has detachable screens
- Comes with pre-applied weatherstripping (no sealant, tape or adhesive needed for install)
- Uses tempered glass for maximum safety and strength
- Is tested to ANSI Z26.1 and FMVSS 205 safety standards
- These windows include a 1/8" clamp ring (which doubles as a trim ring) mounted with screws.
- Comes with self-tapping screws but it is recommended to pre-drill holes in window frame for easier screw application and tightening. Some of the holes will come predrilled, but not all, so please note you'll need to do more pre-drilling or use the self-tapping screws. The window you received is not a return, it's how CR Laurence manufactures their bunk windows.
C.R. Laurence warrants and agrees to replace, or at its sole option, to refund the purchase price of that portion of any material or product supplied by C.R. Laurence Company, which is proven upon inspection within thirty (30) days of the date of receipt of such product or material to be defective in material or workmanship. This warranty coverage does not include issues that arise due to installation errors before and after 30 days of receipt. We recommend a licensed builder/experienced installer complete the installation.
When mounting these windows in your van:
- A template is useful, but not included. Carefully cut the opening according to your template.
- Make sure you paint the cut edges of the new window opening - if you skip this step, moisture can rust out the edges of the window mounting. Also, be careful not to block the weep holes on the bottom of the frame, they let condensation out, again to prevent rust.
- These windows are designed to clamp onto the sheet metal body of the van, they do not require any spacers.
- It is recommended to let the self-tapping screws do their job and bore their own hole. However, pre-drilling with a 1/16" metal drill bit helps get them started and you won't risk damaging the window or screw. In previous install scenarios, pre-drilling and getting the screw started with a drill makes it faster. Finish tightening the screws with a handheld screwdriver to avoid stripping out the hole.
Pick up your order and save! Choose the pickup location close to you to reverse shipping fees at checkout and get your van window in person. We'll email complete pickup instructions once it's ready (lead times depend on current availability).
Specifications: CRL Universal Van Sliding Window Passenger Side (VW1033R)
| Height(in.): | 10" cutout, 10.9" overall |
| Width (in.): | 33" cutout, 33.9" overall |
| Weight (lbs.): | 17 |
| Tint: | 28% dark gray |
| Window Type: | Fixed Slider, Screened (Clamp-in) |
| Fits: | All van models |
CRL Universal Van Sliding Window Passenger Side (VW1033R)
- Reviews
- Questions
1033R & 1033L
Windows appear to be well built. Cardboard covering is not an exact sized template. Also the screws provided required predrilling which is challenging and if torx headed self tapping screws were provided the installation would be much easier. So before starting the install replace the screws with torx head screws.
Good but more work than I expected
Two CRL slider bunk windows are installed with no leaks so far but I would expect a more seamless install process when paying a premium for name brand windows. Only about half the screw holes came predrilled and a few of the ones that were predrilled had missed the frame completely so I had to re-drill at a different angle.
Excellent Product
Excellent Product. Worth the extra funds for the quality. I was surprised that the shipping material quality and overall protectiveness wasn’t that great.
Installed both windows in one day
Screws were tricky to set. Was a little concerned at first on how the windows would seal without butyl tape but seems to be aok.
Installation is a challenge.
The window itself is of excellent quality. The manufacturer does not provide a template or instructions. Therefore, the customer must use the window to create a cardboard template. Do-it-yourself folks are warned that this installation does require patience and a decent level of skill with power metal cutting tools. There are several instructiuonal type videos from non-professional installers on the net.Good luck. Measure several times before you cut a hole in your rig!
