Looking for a side ladder for your Ford Transit camper van? The Backwoods Ram Promaster (2013+) DRIFTR Ladder attaches directly to the DRIFTER roof rack. This DRIFTR side ladder has steps that are deeper and flatter than anything on the market, giving you the opportunity to walk up and down the ladders barefoot without killing your feet. We also have special notches at the end of each step for extra traction in muddy or wet conditions.

Key Features: Backwoods Ram Promaster (2013+) DRIFTR Ladder

• Proudly made in the USA by Backwoods Adventure Mods
• Compatible With 2013-current Ram Promaster vans in the 159 and 159 EXT lengths
• Attaches to DRIFTR roof rack
• Deeper and flatter steps
• Notched steps provide great traction in all conditions
• Black textured powder-coat finish
• Stainless-steel with black oxide coating
• Limited lifetime warranty.

How to Mount:

Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld. These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the DRIFTR rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!

Documents: Backwoods Ram Promaster (2013+) DRIFTR Ladder

Ram Promaster (2013+) DRIFTR Ladder Installation Manual

Video: Backwoods Ram Promaster (2013+) DRIFTR Ladder