0

Backwoods Mercedes Sprinter (2014+) Ladder for OEM Rails (No Roof Rack)

  • $ 850.00



Looking for easier access to the roof of your Mercedes Sprinter camper van? Our brand new Backwoods Mercedes Sprinter (2014+) Ladder for OEM Rails (No Roof Rack) bolts directly into the Mercedes roof rails and does not require a roof rack. Our ladder has steps that are deeper and flatter than anything on the market, giving you the ability to walk on up and down the ladder barefoot without killing your feet. We also have special notches on the end of each step for extra traction in muddy or wet conditions.

At the top, the ladder bolts to the factory roof tracks. At the bottom, the ladder is mounted by drilling into the pinch weld at the bottom of the van.

Note: Ladder will come black powder coated, not silver as shown in photos.

Key Features: Backwoods Mercedes Sprinter (2014+) Ladder for OEM Tracks (No Roof Rack)

  • Proudly made in the USA by Backwoods Adventure Mods
  • Compatible with 2014-current high-roof Mercedes Sprinter 144, 170 and 170 Ext. Top plate of ladder mounts directly into OEM roof rails.
  • 2-piece steel side ladder with 8 steps
  • Deeper and flatter steps
  • Special notches
  • Black textured powder-coat finish
  • Stainless-steel with black oxide coating
  • Limited lifetime warranty.

How to Mount:

Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld. These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!

Video: Backwoods Mercedes Sprinter (2014+) Ladder for OEM Tracks (No Roof Rack)

 


We Also Recommend