Choose your Ceiling Kit cut option in the menu above. Fan Cutouts(14"x14") are  free of charge! You will be followed up with to get measurements for the cutout location. 

Serg Supply Ceiling Kit is a specialized ceiling kit made to fit your 2007+ Mercedes Sprinter van model!

Serg Supply's Sprinter van ceiling kit is the easiest ceiling kit on the market for DIY installation.  Every panel is CNC-cut for the best possible fit in your Sprinter conversion. 

Upgrade your van today and experience the difference for yourself. Order your Serg Supply Ceiling Kit - Mercedes Sprinter 144''/170"/170"EXT High Roof now and take the first step towards a more organized and productive work environment.

Please read detailed install information at bottom of page before ordering. 

Key Features: Serg Supply Ceiling Kit - Mercedes Sprinter 144''/170"/170"EXT High Roof

• 2007 +Mercedes Sprinter 144''/170"/170"EXT WB High Roof (NCV3 and VS30 models) vans
• Can be made to fit front, rear, or full GoCode Threshold Trim Kit to replace factory foam blocks
• Outer driver-side row features a hidden notch to tuck away factory wiring harness
• This ceiling kit extends to within 1/2" (12mm) of your factory wall edge
• Union panels hold rows together from the backside to hold a consistent 1/8" gap between panels
• Dual row contains up to 10 pucklights. Fan cutouts may affect the position and quantity of your lights
• Does not fit low roof models

FREE SHIPPING on this item in the lower 48 US states.

What's Included?

• Ceiling panels - 1/2" maple plywood
• Rivet Nuts
• Threaded Screws and Washers
• Proper Drill Bit
• Instructions
• Light Pucks (12VLED) - Includes 12v distribution block (holds up to 10 lights), and AC-to-12VDC adapter

Specifications: Serg Supply Ceiling Kit - Mercedes Sprinter 144''/170"/170"EXT High Roof

FAQ's

How does the ceiling kit mount?

All Mercedes Benz sprinter kits are designed to fit directly to the factory holes in your ceiling. The factory holes will need to be bored out to 3/8" for rivet nut inserts prior to installation. All panels are mounted 0.125" apart and cover the entirety of the ceiling between walls. 

 Will the ceiling kits work with ceiling fan cutouts?

Yes, please choose in the dropdown menu at top of page.  You will be contacted after your order is placed to discuss how to measure for your fan cutout location. 

 How do I apply stain, finish, or sealer?

Painting:

• Lightly scuff the entire surface of the product that you plan on coating with 120-180 grit sandpaper.
• Apply 2-3 coats of primer prior to applying your main coat.
• Always apply a finish when you're happy with the paint to get a long lasting appearance.

Staining:

• Sand the surface on all faces with sandpaper traveling with the grain of the wood.
• Apply stain very cautiously to a section of the product that will not be visible to gage the volume and pressure you need to achieve the look you want.
• Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
• Please note that overlapping surfaces may make the stain darker on the overlapped areas.
• Always apply a finish when you're happy with the stain to get a long lasting appearance.